JetCon 2302

Industrial 2-Channel Fast Ethernet to Fiber Media Converter

Overview:

JetCon 2302 is not only a compact 4-port switch, but also a 2 channel RJ45 to fiber media converter - an ideal model that would physically fit in harsh environments with intensive severe electromagnetic interference. In switch mode, JetCon 2302 is an Industrial 4-port 10/100Mbps Fast Ethernet Fiber Switch, incorporating 3.2Gbps switching fabric with non-blocking store and forward technology to fulfill the high transmission performance requirements. In converter mode, JetCon 2302 is an Industrial 2-channel 10/100 TX to 100 FX media converter, featuring remote Link Loss Forwarding technology to provide easy and cost-effective maintenance. By adjusting the DIP switch and resetting the device, users can easily change operation mode and activate LLF function.
Moreover, JetCon2302 provides alarm relay to trigger out a real alarm signal for port or power events. To avoid interferences as well as to extend the network coverage, Single-mode or Multi-mode fiber optic ports meet your needs for up to 30KM long distance transmission.
In addition, to withstand under hazardous environmental conditions, JetCon 2302, compliant with NEMA-TS2 standard, has dual redundant power inputs with wide DC10~60V range, 1.5KV Hi-Pot isolation protection and wide operating temperature for avoiding any power interruption and providing reliable network performance. With IP31 rigid aluminum case, CE/FCC regulatory approvals and 5-year global warranty, JetCon2302 is your reliable choice for industrial field site applications.

Two Channels Media Converter and 4 Ports Fiber Switch
The JetCon2302 can be configured by DIP switch in two different operation modes: media converter or fiber switch. In media converter operation mode, JetCon2302 has 2 channels 10/100 TX to 100 FX. For traditional media converter, it only has one channel TX to FX. Therefore, JetCon2302 can be used to substitute two traditional media converters as a result saving the cost and power use. The Link Loss Forwarding Technology can only be implemented in this mode.
In switch operation mode, JetCon2302 becomes an Industrial 4-port 10/100Mbps Fast Ethernet Switch with 2 100Mbps fiber ports for use in applications where greater distances need to be spanned. It implements fiber ports with multi-mode 2KM or single-mode 30KM transceivers to avoid interferences and achieve stable data transmission in extended field site installations. Incorporating 3.2Gbps switching fabric with non-blocking store and forward technology, JetCon2302 fulfills the high bandwidth industrial communication requirements of full wire transmission with its excellent data exchange performance. The updated configuration will be available after resetting the device.

Link Loss Forwarding Technology

When using traditional fiber converters, users often encounter the following problem: a fiber converter acting like an ordinary unmanaged 2-port switch. When one of the fiber converter's ports fails (e.g. the TX port), the other one (e.g. FX port) continues to receive data via the media (e.g. fiber), confusing the device on the other end of the media by indicating that the connection is still intact. But, by the time the disconnection is found, this error causes a great amount of data loss.
Link Loss Forwarding technology solves the problem: if a port loses the connection for any reason, it will activate Link Loss Forwarding to shut down the other port; hence, allowing the device on the other end of the media to detect the disconnection. The administrator over the network can be informed of the disconnection immediately, and therefore can react promptly to the situation, greatly reducing loss caused by link failure.


Wide Range Redundant Power Inputs & True Reliability
In field site applications, unstable power input always impacts on the reliability of system and causes an interruption of communication. To provide a higher reliability, JetCon 2302 has a wide range redundant power input 10~60VDC that meets the NEMA-TS2 requirements for power variation. In addition, with -25~75°C and -40~75°C (JetCon 2302-w model) wide operating temperature range, the JetCon 2302 can ensure high performance data transmission under harsh environments.

Features:

  • Two Channels 10/100 TX to 100 FX media converter
  • Two 10/100TX with 2 100FX Fast Ethernet Fiber Switch
  • Supports Auto MDI/MDI-X, Auto Negotiation
  • Supports Multi-mode 2KM, Single-mode 30KM
  • 3.2Gbps Non-Blocking Switch Fabric
  • Auto Link Loss Forwarding (LLF) for fault detection
  • Power and Port event alarm
  • Redundant 10~60V DC Power inputs with DC polarity protection
  • NEMA -TS2 Compliance (applying)
  • Aluminum case with IP-31 grade protection
  • Supports 1.5KV Hi-Pot isolation protection
  • Operating temperature -25°C~75°C for hazardous environment application (-40°C~75°C wide operating temperature model available by request)
 

Ordering information:

JetCon 2302-m Industrial 2-Channel Fast Ethernet to Fiber Media Converter, SC, Multi-mode/ 2KM

JetCon 2302-s Industrial 2-Channel Fast Ethernet to Fiber Media Converter, SC, Single-mode/ 30KM
Includes:
* JetCon 2302-m / 2302-s
* Quick Installation Guide

Vendor: Korenix

Files:

JetCon 2302   download

Ask about JetCon 2302:

Send