JetCon 2301
Industrial Fast Ethernet to Fiber Media Converter
Overview:
JetCon
2301 is a single port Fast Ethernet to Fiber media converter, compliant
with EN50155, EN 50121-3-2 and EN 50121-4 Railway standards to provide
excellent performance under harsh environments featuring intensive
vibration/shock and severe electromagnetic interference. Users can
benefit from the Single-mode and Multi-mode fiber optic ports of the
media converter for providing extended distance transmission of up to
30KM.
The JetCon 2301 supports 4 types of forwarding modes - store and
forward, modify cut-through, pure converter and converter modes for
fulfilling extreme low latency requirements – Fieldbus and EtherCAT,
with invariant forwarding latency in 64~1600 bytes packet length. To
forward link status changes for alerting remote or central management
systems, JetCon 2301 features remote Link Loss Forwarding technology as a
result providing easy maintenance and greatly saving time. Users can
easily activate forwarding mode and LLF functions by adjusting the DIP
switch and resetting the converter to apply reconfigurations. Moreover,
the device provides alarm relay to trigger out a real alarm signal for
port or power events.
JetCon 2301 power redundancy with wide range DC10V~60V inputs and
built-in reverse polarity protection for ensuring the power continuity
in the system.
Combining 1.5KV Hi-PoT isolation protection and -40~70°C wide operating
temperature range, JetCon 2301 withstands vibration and shock in heavy
machinery industry and interferes electromagnetic allying power
substation environments while keeping your applications running
non-stop.
Link Loss Forwarding Technology
When using traditional fiber converters, users often encounter the
following problem: a fiber converter acting like an ordinary unmanaged
2-port switch. When one of the fiber converter's ports fails (e.g. the
TX port), the other one (e.g. FX port) continues to receive data via the
media (e.g. fiber), confusing the device on the other end of the media
by indicating that the connection is still intact. But, by the time the
disconnection is found, this error causes a great amount of data loss.
If a port loses the connection for any reason, it will activate Link
Loss Forwarding to shut down the other port; hence, allowing the device
on the other end of the media to detect the disconnection. The
administrator over the network can be informed of the disconnection
immediately, and react promptly to the situation, greatly reducing loss
caused by any link failure.
Features:
- One port 10/100 TX to 100 FX media converter
- Auto Link Loss Forwarding for fault detection
- Supports Multi-forwarding mode : Store and forward, modify cut-through, pure converter and converter mode
- Supports Auto MDI/MDI-X, Auto Negotiation
- Supports Multi-mode 2KM, Single-mode 30KM
- Extreme Low Data Forwarding Latency- 1.6 x 10-6 S
- Redundant Wide range 10~60V DC Power inputs with DC polarity protection
- Supports 1.5KV Hi-Pot isolation protection
- -25~70°C operating temperature for hazardous environment applications (JetCon 2301-w:-40~70°C available by request)
Ordering information:
JetCon 2301-m Industrial Fast Ethernet to Fiber Media Converter, SC, Multi-mode/ 2KM
Includes:
* Industrial Fast Ethernet Media Converter, Multi-mode
* Quick Installation Guide
JetCon 2301-s Industrial Fast Ethernet to Fiber Media Converter, SC, Single-mode/ 30KM
Includes:
* Industrial Fast Ethernet Media Converter, Single-mode
* Quick Installation Guide
Files:
Ask about JetCon 2301: