JetCon 2301

Industrial Fast Ethernet to Fiber Media Converter

Overview:

JetCon 2301 is a single port Fast Ethernet to Fiber media converter, compliant with EN50155, EN 50121-3-2 and EN 50121-4 Railway standards to provide excellent performance under harsh environments featuring intensive vibration/shock and severe electromagnetic interference. Users can benefit from the Single-mode and Multi-mode fiber optic ports of the media converter for providing extended distance transmission of up to 30KM.

The JetCon 2301 supports 4 types of forwarding modes - store and forward, modify cut-through, pure converter and converter modes for fulfilling extreme low latency requirements – Fieldbus and EtherCAT, with invariant forwarding latency in 64~1600 bytes packet length. To forward link status changes for alerting remote or central management systems, JetCon 2301 features remote Link Loss Forwarding technology as a result providing easy maintenance and greatly saving time. Users can easily activate forwarding mode and LLF functions by adjusting the DIP switch and resetting the converter to apply reconfigurations. Moreover, the device provides alarm relay to trigger out a real alarm signal for port or power events.

JetCon 2301 power redundancy with wide range DC10V~60V inputs and built-in reverse polarity protection for ensuring the power continuity in the system.
Combining 1.5KV Hi-PoT isolation protection and -40~70°C wide operating temperature range, JetCon 2301 withstands vibration and shock in heavy machinery industry and interferes electromagnetic allying power substation environments while keeping your applications running non-stop.

Link Loss Forwarding Technology
When using traditional fiber converters, users often encounter the following problem: a fiber converter acting like an ordinary unmanaged 2-port switch. When one of the fiber converter's ports fails (e.g. the TX port), the other one (e.g. FX port) continues to receive data via the media (e.g. fiber), confusing the device on the other end of the media by indicating that the connection is still intact. But, by the time the disconnection is found, this error causes a great amount of data loss.

If a port loses the connection for any reason, it will activate Link Loss Forwarding to shut down the other port; hence, allowing the device on the other end of the media to detect the disconnection. The administrator over the network can be informed of the disconnection immediately, and react promptly to the situation, greatly reducing loss caused by any link failure.

JetCon 2301 Industrial Fast Ethernet to Fiber Media Converter

 

Features:

  • One port 10/100 TX to 100 FX media converter
  • Auto Link Loss Forwarding for fault detection
  • Supports Multi-forwarding mode : Store and forward, modify cut-through, pure converter and converter mode
  • Supports Auto MDI/MDI-X, Auto Negotiation
  • Supports Multi-mode 2KM, Single-mode 30KM
  • Extreme Low Data Forwarding Latency- 1.6 x 10-6 S
  • Redundant Wide range 10~60V DC Power inputs with DC polarity protection
  • Supports 1.5KV Hi-Pot isolation protection
  • -25~70°C operating temperature for hazardous environment applications (JetCon 2301-w:-40~70°C available by request)
 

Ordering information:

JetCon 2301-m Industrial Fast Ethernet to Fiber Media Converter, SC, Multi-mode/ 2KM
Includes:
* Industrial Fast Ethernet Media Converter, Multi-mode
* Quick Installation Guide

JetCon 2301-s Industrial Fast Ethernet to Fiber Media Converter, SC, Single-mode/ 30KM
Includes:
* Industrial Fast Ethernet Media Converter, Single-mode
* Quick Installation Guide

Vendor: Korenix

Files:

JetCon 2301   download

Ask about JetCon 2301:

Send