Overview:
JetNet 4010 is an industrial Managed Fast Ethernet Switch, designed with 7-10/100TX and 3-10/100 RJ-45 / 100FX SFP combo ports. The flexible 3 combo ports offer
flexibility for additional fiber connections by plugging different types
of 100MM SFP modules, which can support 2KM in Multi-Mode or 120KM in
Single-Mode. The combo ports make port combination even easier, such as 8
RJ ports and 2 fiber ports, or 9 RJ ports and 1 fiber port. The
standard 10 port Fast Ethernet switch greatly reduces total cost by up
to 15% for fiber uplink network.
In addition to cost savings, the flexible design of the JetNet 4010 can adapt to the world's fastest Ring Technology by Korenix. It only takes 5ms to recover from link failure, no matter how many nodes are inside a ring, and the restore time is zero when the failed link is recovered. The patented Multiple Super Ring provides the most flexible ring topologies, such as shared link of multiple rings, or shared unit of multiple rings, making it the best possible. The Multiple Super Ring is highly compatible to Rapid Spanning Tree by the new Dual Homing plus design. JetNet 4010 also enhances security designs, such as SSH, 802.1X, etc.
3 Flexible Fast Ethernet Combo Ports
The JetNet 4010 is designed with three combo Fast Ethernet ports. Each combo port combines one Small Form factor Pluggable (SFP) socket for 100Mbps multimode or single mode SFP transceiver, as well as one RJ-45 copper port in 10Mbps full duplex, 100Mbps half /full
duplex link mode. The switch will automatically detect the priority of
cable connections for each combo port. Users are able to connect two
100Mbps SFP ports of JetNet 4010 as a Fast Ethernet Fiber Redundant Ring
topology and the third combo port as a fiber uplink port or an
applicable port.
Comprehensive Redundant Solutions- Multiple Super Ring (MSR) Technology
The JetNet 4010 supports MSR (Multiple Super Ring) the next new
generation of RSR (Rapid Super Ring) Ring technology. This new
technologies is perfect for different network redundancy applications
and structures. With the MSR technology, a node can be configured to
multiple rings with the failover time in as little as 5ms and
ZERO-second restore time. In addition, users can extend the ring
topology by adding hundreds of JetNet 4010 to meet the network needs
without compromising the speed of the network.
The MSR also facilitates the JetNet 4010 to connect with core
management switch via standard Rapid Spanning Tree Protocol or through
multiple paths or nodes to increase the reliability by Rapid Dual Homing
(RDH) Technology. By integrating MSR and Link Aggregation Control
Protocol (LACP) the JetNet 4010 can enhance the link availability and to
increase the link capacity. Two or more Fast Ethernet connection are
bundled in order to increase the bandwidth and to create resilient and
redundant links.
Rapid Dual Homing (RDH) Technology
Rapid Dual Homing (RDH) replaces DualHoming II and can be used for ring coupling. While keeping easy
configuration and multiple redundancies, the failover time is much faster (less than 50 ms) and the restore
time is ZERO (seamless restoration). Uplinks can be auto detected and
gathered into groups. In each group, uplinks are sorted into Primary,
Secondary, and Standbys by their link speed. The uplink with the
highest speed is more likely to be the active path for data transmission. Link aggregation is also integrated
into RDHTM. An uplink can be a link or several links aggregated as a
trunk, which provides better redundancy and link capacity.
Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows you to
group multiple Ethernet ports in parallel to increase the link
bandwidth. The aggregated ports can be considered one physical port, so
that the bandwidth is higher than just one single Ethernet port. The
member ports of the same trunk group can balance the loading and backup
with each other. |
|
The LACP feature is usually
used when you need higher bandwidth for the backbone network. This is an
inexpensive way for users to transfer much more data. If the trunk port
is also assigned as a ring port, it will become a TrunkRingTM, which
means that the bandwidth of ring path has increased with port trunk
technology. Now, there is no recovery time when failures occur. The
JetNet 4010 provides a simple and easy way to aggregate port bandwidth
into Rapid Super Ring. |
Various Network Control and Security Features
The JetNet 4010 provides various network control and security
features. The Network Control feature allows users to optimize their
industrial environment. The supported features include VLAN, IGMP
Snooping, Quality of Service(QoS), Link Aggregation Control Protocol
(LACP), Rate Control. The security can help users avoid hackers’ attack.
The features include DHCP Server, IP and MAC Binding, 802.1x Access
Control, SSH, IP Access Table and Port Security.
Port Security
Port Security is the enhanced security feature provided by JetNet
4010. Port Security is also known as Port and MAC binding. The users can
bind specific MAC address to the specific port, add the MAC and Port
binding entry/entries to the port Port Security is the enhanced security
feature provided by JetNet 4010. Port Security is also known as Port
and MAC binding. The users can bind specific MAC address to the specific
port, add the MAC and Port binding entry/entries to the port.
JetView, Easy Management Utility
The JetView is the convenient tool to help administrators to discover
the JetNet series Switches. It support group IP assignment,group
firmware upgrade, group configuration backup and restore.
A Built-in Watchdog Timer
With a built-in Watchdog timer, the JetNet 4010
performs a warm boot (restarting the switch) automatically when the switch system locks up. It
saves the effort of maintenance for keeping network
alive if the switch can recover by itself. |
|
Brilliant Idea for Hazardous Environment Application Robust Mechanism Design
Korenix JetNet 4010 has an outstanding outlook plus is rock solid with
strong functionality. Using an aluminum extrusion case with industrial
quality, IP 31 class of protection, light weight, rigid shell and
excellent thermal conductivity units can operate under harsh industrial
environment reliably.
Features:
- 7 10/100 Base TX and 3 RJ-45/SFP combo (10/100Base-TX, 100Base-FX )
- Multiple Super Ring (recovery time <5ms), Rapid Dual Homing,Multiple Ring, and RSTP
- VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
- 32Gbps Non-Blocking, 8K MAC address table
- Supports console CLI , Web, HTTPS, SSH and JetView
- Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, 802.1x network access control
- Event Notification by E-mail, Syslog, Digital Input and Relay Output
- Rigid Aluminum Case Complies with IP31, Redundant power, DIN-Rail/Wall-Mounting/Desktop Installation
Ordering information:
JetNet 4010 Industrial 10-Port Web-Managed Fast Ethernet Switch
Includes:
* JetNet 4010(without SFP transceiver)
* Wall mounting plate
* Quick Installation Guide
* Documentation CD-ROM
* Console cable
Optional Accessories
* 100Base-FX Multi-Mode SFP Transceiver
* 100Base-FX Single-Mode SFP Transceiver
* 100Base-FX BIDI/WDM Single-Mode SFP Transceiver
Files:
Ask about JetNet 4010: