FiberMod 16DI
Isolated digital inputs to fiber optic
Overview:
FiberMod 16DI is a stand-alone digital FiberMod module and
low cost solution designed for industrial applications, remote control
and monitoring. It can easy replace regular cables for signaling. Signal
from digital input to digital output takes less then 10ms. That makes
users replace regular control cables with only one fiber.There is
additional possibility to filter signal and takes threshold for 50 ms or
if its necessary send immediately.
FiberMod 16DI is composed of the specific equipments (signal converters) which assure the
data transfer
(through the communication processor) from the programmable logical
controller to the dispatcher and commands transfer from the dispatcher
to the programmable logical controller.
Integrated LED's indicate specific operating module status to the user.
Module designed for Din rail mounting that let to use device in wide
area of industrial environment. The FiberMod 16DI has 16 optically
isolated digital inputs with 2500 Vrms protection. Each of the digital
inputs voltage range of 9-30 VDC.Wide power supply input range allow
from 10 to 36 VDC operating voltage.
The FiberMod 16DI modules are ideal solution for such
applications as data acquisition, control, process monitoring,
testingand measurement. It is possible to use the input modules together
with the FiberMod Modbus-1/2/4to monitor/controlthe input/outputsignals
over Modbus protocol from any SCADA system or WCC 100.
The FiberMod 16DI modules should be used in pair with FiberMod 16RO or FiberMod Modbus-1/2/4 modules.
Features:
Digital inputs |
Input channels: |
16 |
DC Input: |
9-30VDC |
Isolation voltage: |
2500 Vrms |
|
|
MBd Link |
Optical Power Budget with 50/125um fiber: |
9,6 dB |
Optical Power Budget with 62,5/125um fiber: |
15 dB |
Connect type: |
ST |
Wavelength: |
820 nm |
Link distance: |
2 km |
|
|
Power Requirements |
System power: |
+24VDC (10-36VDC) |
Power consumption: |
1W |
|
|
Mechanical |
Dimensions: |
67(A) x 88(P) x 90(I) mm |
Mounting: |
DIN rail |
Material: |
Plastic |
|
|
Environmental |
Operating temperature: |
-5 ~ 60°C |
Storage temperature: |
-40 ~ 80°C |
Warranty: |
1 year |
|
|
Ask about FiberMod 16DI: