JetNet 4510

Industrial 10-port Managed Fast Ethernet Switch

Overview:

JetNet 4510 is an industrial Managed Fast Ethernet Switch, designed with 7-10/100TX and 3-10/100 RJ-45 / 100FX SFP combo ports. The flexible 3 combo ports offer flexibility for additional fiber connections by plugging different types of 100MM SFP modules, which can support 2KM in Multi-Mode or 120KM in Single-Mode. The combo ports make port combination even easier, such as 8 RJ ports and 2 fiber ports, or 9 RJ ports and 1 fiber port. The standard 10 port Fast Ethernet switch greatly reduces total cost by up to 15% for fiber uplink network.

In addition to cost savings, the flexible design of the JetNet 4510 can adapt to the world's fastest Ring Technology by Korenix. It only takes 5ms to recover from link failure, no matter how many nodes are
inside a ring, and the restore time is zero when the failed link is recovered. The patented Multiple Super
Ring provides the most flexible ring topologies, such as shared link of multiple rings, or shared unit of multiple rings, making it the best possible. The Multiple Super Ring is highly compatible to Rapid Spanning Tree by the new Rapid Dual Homing design. JetNet 4510 also enhances security designs, such as SNMP V3, SSH, 802.1X, etc.

3 Flexible Fast Ethernet Combo Ports
The JetNet 4510 is designed with three combo Fast Ethernet ports. Each combo port combines one Small
Form factor Pluggable (SFP) socket for 100Mbps multimode or single mode SFP transceiver, as well
as one RJ-45 copper port in 10Mbps full duplex, 100Mbps half /full duplex link mode.
The switch will automatically detect the priority of cable connections for each combo port. Users are able to connect two 100Mbps SFP ports of JetNet 4510 as a Fast Ethernet Fiber Redundant Ring topology and the third combo port as a fiber uplink port or an applicable port.

Comprehensive Redundant Solutions- Multiple Super Ring (MSR) Technology
The JetNet 4510 supports new generation of ring technology – MSR which includes various new technologies for different network redundancy applications and structures. With the MSR technology, the failover time can be shortened less than 5 milliseconds with zero second restore time. With unlimited device connectivity, users can enlarge ring structures to meet the campus needs without the data traffic delay. The MSR also facilitates the JetNet 4510 to connect with core management switch via standard Rapid Spanning Tree Protocol, though multiple paths or nodes to increase the reliability by Rapid Dual Homing (RDH) technology. To enhance link availability and to increase link capacity, the JetNet 4510 has been implemented IEEE 802.3ad Link Aggregation Control Protocol (LACP). With LACP technology, the JetNet 4510 can negotiate an automatic port bundling dynamically between switches. Two or more Fast Ethernet connections are combined in order to increase the bandwidth and to create resilient and redundant links. It also provides two power inputs for power redundancy and wide DC power range, from DC 12V to DC 48V, supporting DC-48V in industrial applications.

Rapid Dual Homing (RDH) Technology
Rapid Dual Homing (RDH) replaces DualHoming II and can be used for ring coupling. While keeping easy
configuration and multiple redundancies, the failover time is much faster (less than 50 ms) and the restore
time is ZERO (seamless restoration). Uplinks can be auto detected and gathered into groups. In each group, uplinks are sorted into Primary, Secondary, and Standbys by their link speed. The uplink with the
highest speed is more likely to be the active path for data transmission. Link aggregation is also integrated
into RDHTM. An uplink can be a link or several links aggregated as a trunk, which provides better redundancy and link capacity.

Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows you to group multiple Ethernet ports in parallel to increase the link bandwidth. The aggregated ports can be considered one physical port, so that the bandwidth is higher than just one single Ethernet port. The member ports of the same trunk group can balance the loading and backup with each other.
The LACP feature is usually used when you need higher bandwidth for the backbone network. This is an inexpensive way for users to transfer much more data. If the trunk port is also assigned as a ring port, it will become a TrunkRingTM, which means that the bandwidth of ring path has increased with port trunk technology. Now, there is no recovery time when failures occur. The JetNet 4510 provides a simple and easy way to aggregate port bandwidth into Rapid Super Ring.

Various Network Control and Security Features
The JetNet 4510 provides various network control and security features. The Network Control feature
allows users to optimize their industrial environment. The supported features include VLAN, IGMP
Snooping, Quality of Service(QoS), Link Aggregation Control Protocol (LACP), Rate Control. The security
can help users avoid hackers’ attack. The features include DHCP Server, IP and MAC Binding, 802.1x
Access Control, SSH, IP Access Table and Port Security.

Port Security
Port Security is the enhanced security feature provided by JetNet 4510. Port Security is also known as Port and MAC binding. The users can bind specific MAC address to the specific port, add the MAC and Port binding entry/entries to the port Port Security is the enhanced security feature provided by JetNet 4510. Port Security is also known as Port and MAC binding. The users can bind specific MAC address to the specific port, add the MAC and Port binding entry/entries to the port.

 

Easy-to-Configure Network Management Features
The JetNet 4510 also provides users many advanced management features. It can be configured smartly by JetView, Web browser, SNMP, Telnet and RS-232 console Command Line Interface (CLI). Failure notification by E-mail, SNMP Trap, System Log, Digital Input and Fault Relay. The JetNet 4510 also supports built-in Watchdog timer to recover system when detected CPU failure. 

 

JetView, Easy Management Utility
The JetView is the convenient tool to help administrators to discover the JetNet series Switches. It support group IP assignment,group firmware upgrade, group configuration backup and restore. 

 

 

A Built-in Watchdog Timer
With a built-in Watchdog timer, the JetNet 4510
performs a warm boot (restarting the switch) automatically when the switch system locks up. It
saves the effort of maintenance for keeping network
alive if the switch can recover by itself.

Brilliant Idea for Hazardous Environment Application Robust Mechanism Design
Korenix JetNet 4510 has an outstanding outlook plus is rock solid with strong functionality. Using an aluminum extrusion case with industrial quality, IP 31 class of protection, light weight, rigid shell and excellent thermal conductivity units can operate under harsh industrial environment reliably.

Features:

  • 7 10/100 Base TX and 3 RJ-45/SFP combo (10/100Base-TX, 100Base-FX )
  • Multiple Super Ring (recovery time <5ms), Dual Homing II, Multiple Ring and RSTP
  • VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
  • 32Gbps Non-Blocking, 8K MAC address table
  • Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH and JetView
  • Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, 802.1x network access control
  • Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output
  • Rigid Aluminum Case Complies with IP31, Curvilinear heat dispersing, Redundant power, DIN-Rail/Wall-Mounting/Desktop Installation
 

Ordering information:

JetNet 4510 Industrial 10-Port Managed Fast Ethernet Switch
Includes:
* 7-ports 10/100Base-TX and 3 10/100/ 100FX SFP Combo ports Switch
* Wall mounting plate
* Quick Installation Guide
* Documentation CD-ROM

Optional Accessories

* SFP100MM:100Mbps SFP Transceiver,1310nm, multi-mode, 2KM, -10~70℃
* SFP100MM-w:100Mbps SFP Transceiver,1310nm, multi-mode, 2KM, -40~85℃
* SFP100SM30:100Mbps SFP Transceiver,1310nm, single-mode, 30KM, -10~70℃
* SFP100SM30-w:100Mbps SFP Transceiver,1310nm,single-mode, 30KM, -40~85℃

 

Vendor: Korenix

Files:

JetNet 4510   download

Ask about JetNet 4510:

Send