Overview:
JetNet 4510 is an industrial Managed Fast Ethernet Switch, designed
with 7-10/100TX and 3-10/100 RJ-45 / 100FX SFP combo ports. The flexible
3 combo ports offer flexibility for additional fiber connections by
plugging different types of 100MM SFP modules, which can support 2KM in
Multi-Mode or 120KM in Single-Mode. The combo ports make port
combination even easier, such as 8 RJ ports and 2 fiber ports, or 9 RJ
ports and 1 fiber port. The standard 10 port Fast Ethernet switch
greatly reduces total cost by up to 15% for fiber uplink network.
In addition to cost savings, the flexible design of the JetNet 4510
can adapt to the world's fastest Ring Technology by Korenix. It only
takes 5ms to recover from link failure, no matter how many nodes are
inside a ring, and the restore time is zero when the failed link is recovered. The patented Multiple Super
Ring provides the most flexible ring topologies, such as shared link
of multiple rings, or shared unit of multiple rings, making it the best
possible. The Multiple Super Ring is highly compatible to Rapid Spanning
Tree by the new Rapid Dual Homing design. JetNet 4510 also enhances
security designs, such as SNMP V3, SSH, 802.1X, etc.
3 Flexible Fast Ethernet Combo Ports
The JetNet 4510 is designed with three combo Fast Ethernet ports. Each combo port combines one Small
Form factor Pluggable (SFP) socket for 100Mbps multimode or single mode SFP transceiver, as well
as one RJ-45 copper port in 10Mbps full duplex, 100Mbps half /full duplex link mode.
The switch will automatically detect the priority of cable connections
for each combo port. Users are able to connect two 100Mbps SFP ports of
JetNet 4510 as a Fast Ethernet Fiber Redundant Ring topology and the
third combo port as a fiber uplink port or an applicable port.
Comprehensive Redundant Solutions- Multiple Super Ring (MSR) Technology
The JetNet 4510 supports new generation of ring technology – MSR
which includes various new technologies for different network
redundancy applications and structures. With the MSR technology, the
failover time can be shortened less than 5 milliseconds with zero second
restore time. With unlimited device connectivity, users can enlarge
ring structures to meet the campus needs without the data traffic
delay. The MSR also facilitates the JetNet 4510 to connect with core
management switch via standard Rapid Spanning Tree Protocol, though
multiple paths or nodes to increase the reliability by Rapid Dual
Homing (RDH) technology. To enhance link availability and to increase
link capacity, the JetNet 4510 has been implemented IEEE 802.3ad Link
Aggregation Control Protocol (LACP). With LACP technology, the JetNet
4510 can negotiate an automatic port bundling dynamically between
switches. Two or more Fast Ethernet connections are combined in order
to increase the bandwidth and to create resilient and redundant links.
It also provides two power inputs for power redundancy and wide DC
power range, from DC 12V to DC 48V, supporting DC-48V in industrial
applications.
Rapid Dual Homing (RDH) Technology
Rapid Dual Homing (RDH) replaces DualHoming II and can be used for ring coupling. While keeping easy
configuration and multiple redundancies, the failover time is much faster (less than 50 ms) and the restore
time is ZERO (seamless restoration). Uplinks can be auto detected and
gathered into groups. In each group, uplinks are sorted into Primary,
Secondary, and Standbys by their link speed. The uplink with the
highest speed is more likely to be the active path for data transmission. Link aggregation is also integrated
into RDHTM. An uplink can be a link or several links aggregated as a
trunk, which provides better redundancy and link capacity.
Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows you to
group multiple Ethernet ports in parallel to increase the link
bandwidth. The aggregated ports can be considered one physical port, so
that the bandwidth is higher than just one single Ethernet port. The
member ports of the same trunk group can balance the loading and backup
with each other. |
![](http://www.korenix.com/user/cimage/JetNet-5010G-06.jpg) |
The LACP feature is usually
used when you need higher bandwidth for the backbone network. This is an
inexpensive way for users to transfer much more data. If the trunk port
is also assigned as a ring port, it will become a TrunkRingTM, which
means that the bandwidth of ring path has increased with port trunk
technology. Now, there is no recovery time when failures occur. The
JetNet 4510 provides a simple and easy way to aggregate port bandwidth
into Rapid Super Ring. |
Various Network Control and Security Features
The JetNet 4510 provides various network control and security features. The Network Control feature
allows users to optimize their industrial environment. The supported features include VLAN, IGMP
Snooping, Quality of Service(QoS), Link Aggregation Control Protocol (LACP), Rate Control. The security
can help users avoid hackers’ attack. The features include DHCP Server, IP and MAC Binding, 802.1x
Access Control, SSH, IP Access Table and Port Security.
Port Security
Port Security is the enhanced security feature provided by JetNet
4510. Port Security is also known as Port and MAC binding. The users can
bind specific MAC address to the specific port, add the MAC and Port
binding entry/entries to the port Port Security is the enhanced security
feature provided by JetNet 4510. Port Security is also known as Port
and MAC binding. The users can bind specific MAC address to the specific
port, add the MAC and Port binding entry/entries to the port.
Easy-to-Configure Network Management Features
The JetNet 4510 also provides users many advanced management features.
It can be configured smartly by JetView, Web browser, SNMP, Telnet and
RS-232 console Command Line Interface (CLI). Failure notification by
E-mail, SNMP Trap, System Log, Digital Input and Fault Relay. The JetNet
4510 also supports built-in Watchdog timer to recover system when
detected CPU failure.
JetView, Easy Management Utility
The JetView is the convenient tool to help administrators to discover
the JetNet series Switches. It support group IP assignment,group
firmware upgrade, group configuration backup and restore.
A Built-in Watchdog Timer
With a built-in Watchdog timer, the JetNet 4510
performs a warm boot (restarting the switch) automatically when the switch system locks up. It
saves the effort of maintenance for keeping network
alive if the switch can recover by itself. |
![](http://www.korenix.com/user/cimage/JetNet4510_02.jpg) |
Brilliant Idea for Hazardous Environment Application Robust Mechanism Design
Korenix JetNet 4510 has an outstanding outlook plus is rock solid with
strong functionality. Using an aluminum extrusion case with industrial
quality, IP 31 class of protection, light weight, rigid shell and
excellent thermal conductivity units can operate under harsh industrial
environment reliably.
Features:
- 7 10/100 Base TX and 3 RJ-45/SFP combo (10/100Base-TX, 100Base-FX )
- Multiple Super Ring (recovery time <5ms), Dual Homing II, Multiple Ring and RSTP
- VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP, Online Multi-Port Mirroring
- 32Gbps Non-Blocking, 8K MAC address table
- Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS, SSH and JetView
- Advanced security feature supports IP Security, Port Security, DHCP Server, IP and MAC Binding, 802.1x network access control
- Event Notification by E-mail, SNMP trap, Syslog, Digital Input and Relay Output
- Rigid Aluminum Case Complies with IP31, Curvilinear
heat dispersing, Redundant power, DIN-Rail/Wall-Mounting/Desktop
Installation
Ordering information:
JetNet 4510 Industrial 10-Port Managed Fast Ethernet Switch
Includes:
* 7-ports 10/100Base-TX and 3 10/100/ 100FX SFP Combo ports Switch
* Wall mounting plate
* Quick Installation Guide
* Documentation CD-ROM
Optional Accessories
* SFP100MM:100Mbps SFP Transceiver,1310nm, multi-mode, 2KM, -10~70℃
* SFP100MM-w:100Mbps SFP Transceiver,1310nm, multi-mode, 2KM, -40~85℃
* SFP100SM30:100Mbps SFP Transceiver,1310nm, single-mode, 30KM, -10~70℃
* SFP100SM30-w:100Mbps SFP Transceiver,1310nm,single-mode, 30KM, -40~85℃
Files:
Ask about JetNet 4510: